Dc Motors for RC Airplane or RC Helicopter  
                                                                                                      

Micro motors for Micro indoor Airplane. 1.5 volt to 3 volt .

     

   

Regular size 7.2 volt to 12 volt. 

CD-rom Brushless Outrunner Motors the airplane perspective "high performance" does not necessarily mean fewer turns. It depends on the type of plane and type of flying. For example, for a slow flyer or a 3D plane where thrust is more important than speed, you would want to turn a fairly large prop at relatively low RPM. For this, you want plenty of torque, which translates to a relatively large number of turns.

On the other hand, for a fast-flying plane, where speed is more important than thrust, you want a smaller prop turning a higher RPM. A relatively low number of turns is more appropriate for this application.

Once you know how many turns you want, select a wire size that will pack as much copper as possible for the number of turns. This improves efficiency. In other words, for a low number of turns, use a larger wire size. For a high number of turns, use a smaller wire size. In all cases, pack as much wire as possible onto the stator.

If you have not built a motor before, I recommend starting with kit from GoBrushless or Strong RC Motors. These provide all the parts you need, along with instructions.Then Email me ..
     Li po Battary 7.4 without connector only Rs. 1200 with free shipping. OR 11 volt Battary Li po only Rs. 1850/- without connector with free shipping any where in india. Email me .. We also need the fiber tape for airplane .